Falk

Falk UltraMax® Concentric Gear Drive

The fight for productivity has a brand new contender: the Falk UltraMax. The UltraMax drive delivers all the performance of a parallel shaft gear drive, with the economy of a gear motor.

Designed to meet the tough challenges of medium and heavy-duty concentric gear drive operation, UltraMax gives you everything you choose equipment for - outstanding design, durability, minimal failure, easy maintenance and overall efficiency.

UltraMax comes in ten sizes, with an output torque range of 282 Nm through 67 800 Nm, or 2500 lb./in. through 600,000 lb./in.

With UltraMax, you get more power for your dollar, with savings of up to 30% over a comparably rated parallel shaft gear drive.

Falk UltraMax. Performance you can rely on, round after round.

Parallel Shaft Performance Meets Gear Motor Economy in UltraMax, the Perfect Concentric Alternative
UltraMax can be used in high torque applications that once required more expensive parallel-shaft drives. Tough and versatile, the compact, long-lasting UltraMax offers a fully-featured concentric design that works in today's global markets. A competitive price and performance-related cost savings give UltraMax bottom-line appeal.

Optimized Design
The UltraMax incorporates the latest in design technology. With its high torque density, UltraMax is the right choice for new applications. And users with early designed 1000F concentric drives in existing applications will appreciate the drop-in interchangeability the UltraMax offers.

Falk Alignment Free Conveyor Drive

The Alignment-Free Drive^TM
Type ABRC
Specifically to meet the demands of worldwide surface and underground belt conveyor applications - is a cost-effective alternative to conventional drive approaches.

The Alignment Free drive offers 40-125 output rpm, compatibility with both NEMA and IEC motors in ranges from 125 hp (90Kw) to 800 hp (630Kw), and uses fluid or electrical soft starts.

For the lowest initial costs, backed up with simplified maintenance, minimal downtime and reduced spares expense, the Alignment Free drive puts teeth into your productivity plans.

Lowest Initial Cost
Up front, you save as much as 20% over conventional foot mounted approaches. How? By eliminating expensive foundation and installation costs. A symmetrical housing design allows the Alignment Free drive to be used in right or left-hand assembly, with only a dipstick and torque arm relocation.

Reduced Downtime
Shaft misalignment, a major cause of costly failure and downtime, is eliminated. What's more, the Alignment Free drive offers registered fit and bolt-together construction for quick, proper assembly and trouble-free operation. The drive is not affected by foundation movement, and offers superior mobility.

Simplified Maintenance The Alignment Free drive gives you plenty of value-added features, including "High Strength" gearing, "Tough Steel" housing construction, and "Magnum" tandem seals. These extras simplify maintenance, extend operating life-and save on long-term costs.

Falk Ultramite® Gearmotor Drives

Type UB - Right Angle Helical Bevel 
Type UC - Helical Concentric Shaft
Type UJ - Helical Shaft Mounted 
Type UW - Helical Worm 

A tough little gearmotor that delivers a powerful punch in the fight for productivity.

With local availability, NEMA/IEC compatibility plus drop-in replacement, the Falk Ultramite is a real champ.

It's a winning combination. Start with a compact size that's the perfect fit for the .25HP/.25KW through 20HP/15KW power range. You can choose a standard plug-in high-efficiency NEMA/IEC motor from stock for an easy bolt-up mounting to the gear drive. Add positive torque transfer without corrosion or fretting, energy efficiency over worm gear drives and quick availability no matter where you're located-and you've got the Falk Ultramite, a genuine contender in the fight for increased factory floor productivity.

What's more, the Ultramite is backed up by a global leader in the power transmission and conveying components industry. It's got the right size, the right statistics and the right name. The Ultramite-it delivers just the right punch.

Kitted Subassemblies
The Ultramite is assembled from convenient, cost-saving kitted subassemblies. offering a wide range of sizes and ratios for assembly. Maximum local availability allows quick response to complete gear drive and spare parts requirements.

What's more, the Ultramite is available in flange-mounted housings for additional flexibility. As the Ultramite line is expanded, these same kits will be utilized in other housing configurations.

Customer Preferred Motors
The Ultramite accepts standard, off-the-shelf NEMA/IEC C-Face and Flanged motors, permitting the use of customer-preferred motor brands. The Ultramite accommodates industry-standard frame sizes-and the choice of motor manufacturer and specifications is up to you, without costly motor adapter systems and special replacement motors. It's hassle- free.

Falk High Thermal Capacity Drives
Type YB Right Angel Shaft
Since 1897, Falk has specialized in the research, design, and construction know-how built into the rugged, dependable Falk gear drives. These precision, through hardened helical right angle Type YB drives are based on earlier successful models. To maintain that reputation, and to keep a step ahead of today's increased industrial requirements, our 20 standard sizes now transmit higher capacity (up to 3727 hp and 2,684,000 lb.-in. output torque) without an increase in external dimensions. This means we've improved the strength and performance of gears, shafts and bearings. To hold them in exact alignment day after day and year after year, extra strong, accurately machined housings are provided. In addition, our Drive One and Type AB line of horizontal right angle drives offer state-of-the-art surface hardened helical and bevel gearing.

Falk Marine Gear Drives : Where Durability Runs Deep

Nowhere is equipment durability more crucial to a company’s survival than on the world’s waterways... where crews and schedules depend on reliable power.

For more than 85 years, Falk has been rewriting the record books for longevity in marine propulsion.

From the heavy-duty gear sets and extended-life bearings, right down to the design and construction of our application-engineered housings, Falk Marine Drives are built to be the most reliable solutions afloat. That’s why demanding work boat manufacturers, owners and operators demand Falk.

MRH Series
MR Series
Custom Drives
Clutches
Upgrades and Replacements

Falk RAM® Mixer Drives - Born and Bred for Mixing Service

• Type HM - Ram®Vertical Axis Helical Mixer Drive
• Type MD - Ram® Vertical Axis Right Angle Mixer Drive
• Type LB, LH - Ram® Vertical Axis Parallel Shaft Mixer Drive

RAM Mixer Drives are engineered and built specifically to handle the unique and demanding requirements of mixing applications.

RAM Mixer Drives can handle the tough mixing requirements in industries like food processing, waste and water treatment, chemical processing, pulp and paper, pharmaceutical, power generation, and mining.

With a wide range of sizes available, there's a RAM Mixer Drive for virtually any mixing application. Best of all, every RAM is fully backed by Falk- one of the most trusted names in industry for more than 100 years.

What Sets RAM Apart is its Unique Design
Ordinary commercial drives can't stand up to typical mixing requirements -high bending and thrust loads on the output shaft, reliable round-the-clock operation, and absolutely no leakage of gear lubricant into the product being mixed.

RAM is no ordinary drive. It's designed specifically for the rigorous requirements of mixing service by Rexnord, a company that's been supplying mixer drives for over 40 years.

The unique RAM features that make a difference include:

• Large-diameter, high-capacity output shafts to accommodate the high-bending moment loads common in mixing applications.
• Extended bearing life -minimum 30,000 hours L-10 at 1.25 service factor even at high thrust and moment loads.
• No-leak drywell design physically separates the oil sump from the output shaft to eliminate gear oil contamination of your product.
• Rugged cast or fabricated housings designed to withstand the stresses of mixing while maintaining accurate gear alignment.
• Helical and spiral-bevel gearing for quiet operation and high drive efficiency.
• Product flexibility for handling almost any type of installation. RAM Mixer Drives are available with solid or hollow output shafts, and can be adapted to top, bottom, or side entry mixing.
• Ratings equal to or higher than original equipment drives allow you to easily enhance system performance when replacing your existing drive.
• Excellent availability lets Falk ship an HMX or MDX replacement unit in just 72 hours. . . 24 hours on an emergency breakdown basis.
• Quick, direct, drop-in replacement.

RAM MDX Series Mixer Drives are designed for fast, easy, drop-in interchangeability with many popular Lightning®, Chemineer®, and Philadelphia® units.

Now you can easily upgrade your existing Lightning, Chemineer or Philadelphia drive with a quick, bolt-in RAM replacement. Standard interchange adapters provide the connection.

Custom-engineered adapters are also available to enable you to easily replace other types and makes of mixer drives.

• Falk A+Plus® Gear Drives
• Type A Parallel
• Type AXV Parallel Shaft Vertical
• Type AB - Right Angle
• Type ABX Right-Angle Vertical

Falk Quadrive® Shaft Mounted Drives - New 5000 Series

Stop Dodging the Issue with Falk Quadrive- Removal Guaranteed!
Type JR with TA-Taper Bushing

With the Falk Quadrive, you don't have to turn a blind eye to drive removal issues. Quadrive is guaranteed to come off the shaft, regardless of length of service or operating conditions, or we'll replace it - FREE. And it's backed by the industry's first standard, shaft-to-shaft 3 Year Warranty. So open your eyes to trouble-free drive performance.

It's a simple fact. The heavy duty, shaft-mounted Falk Quadrive features a completely unique design that makes it the easiest, quickest shaft-mounted drive to install and remove.

Quadrive is built to stand up to continuous rough duty. And now, with new higher ratings, you may be able to downsize the drive, saving money right up front.

We deliver the total power transmission package. So you can rely on A+Plus drives to deliver picture-perfect performance. Right from the start.

Falk A+Plus parallel-shaft drives feature super-rugged designs to meet every operating challenge. And they're site-proven in the world's most demanding applications to take plenty of tough, on-the-job punishment.

Application-engineered to minimize stress and wear, and to extend service life, these drives deliver steady, trouble free operation, day-after-day. They're also specially designed and constructed to offer you maximum application flexibility.

Smart Features that Save

Falk Magnum "No-Leak" Seals:
Exclusive labyrinth-design, non-wearing, Magnum seal keeps oil in and dirt out. A purgeable grease chamber with, in most cases a *Viton® contact seal, prevents the infiltration of dirt and grime. A unique drain-back passage combines with a radial and axial bush seal to retain oil and eliminate leaks. Tandem lip type seals are used for high oil level requirements. Manufacturer's seal numbers are published for local sourcing.

Superior "High Strength" Gearing:
Gearing is engineered to exceed AGMA requirements. Coarse pitch helical gears (25 degree pressure angle) are protuberance hobbed, case carburized, and finish ground with lead an profile modifications that assure full contact under load. These modifications, when combined with housing bore accuracy and assembly quality, provide gear mesh performance that is equivalent to gearing with a quality 12 level. Spiral bevel gears are case carburized, shot peened, and finish skived. Our gears can take the shock where others fail.

DRIVE ONE® The global solution that changes everything.

• Drive One Parallel Shaft
• Alternate Right Angle Drive One
• Falk Omnibox® Worm Gear Drives
• Solid Input Shaft and Solid Output Shaft
• Motorized Solid Input Shaft and
• Hollow Output Shaft

When it comes to winning solutions to your right angle, small worm gear drive challenges, Omnibox has it all.

Omnibox incorporates our best durability and reliability features into one competitively priced product line.

Over 475,000 configurations mean there's one that's precisely right for virtually every application.

And Omnibox delivers all this quality and performance in a package that offers drop-in convenience for minimal downtime.

Omnibox truly is the best of the best

• Sizes: 1.33 "through 10" centers
• Output speeds: .25 through 350 RPM
• Solid or hollow alloy-steel shafts
• Single or double ended outputs
• NEMA and IEC motor flanges

Single reduction drives or double reduction drives in helical-worm or worm-worm configurations

Drive One redefines lowest total cost torque management for heavy-duty industry.

Now, one drive system combines low initial cost with lowest total cost for a wider range of applications than ever before possible. It's exactly what you'd expect from a leader. Something different... something better... for everybody.

One solution covers it all.
Drive One delivers unmatched mounting configuration flexibility on a global scale. For the first time ever, customer can get complete packages for virtually any application from a single source... using a single drive solution.

• Only drive to provide 6-sided mounting capability
• Hard metric design
• IEC and NEMA motor accessories
• Meets US and international rating standards
• Application standards for shaft mounted drives, mixer drives, and alignment-free drives
• Meets high-ratio requirements when used in conjunction with planetary drives
• Low ratio, high thermal drives satisfy tough thermal requirements
• Comprehensive accessories help you tailor Drive One to virtually any application requirement.